Product Overview
Fire-Dex Proximity Turnout Coat. The outer shell shall incorporate three separate body panels, two front panels and one back panel. These body panels are to be specifically designed to provide a comfortable fit with ample room in the back for increased mobility. Shoulders shall be reinforced with a fourth layer of protective thermal material in addition to the already present three layers of shell, thermal and moisture barriers. The sleeves shall be two-panel construction, tapered design and set-in. Each sleeve shall incorporate an underarm gusset in all three layers between the underside of the sleeve and the body of the coat. The sleeves shall have a water well to prevent liquids and other hazardous materials from entering when the arms are raised. The collar shall be constructed of four layers. It will incorporate two layers of outer shell material and two layers of moisture barrier. The moisture barrier shall be sandwiched between the two layers of outer shell material and face film side toward the shell. The moisture barrier shall be bound to the thermal liner around the perimeter of the liner using an FR Neoprene coated binding tape double needle lock stitched. The liner shall be secured to the outer shell by means of five, nickel coated brass snap fasteners along the leading edges of the left and right facings. XMDH Drag Rescue Device - A drag rescue device shall be located between the liner and outer shell of each coat. The drag rescue device shall be made of KEVLARA webbing strap sized to the coat. The KEVLAR webbing shall be affixed so as to create a loop from the mid-back exit over the top of the right shoulder, under the right arm, across the mid-back.
